自動攪拌一體車開拓者！

400-879-1999

站內搜索

新聞資訊

公司新聞行業動態

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌機新?lián)Q輪胎注意事項有哪些？

所屬分類：公司新聞發布時間：2021-09-15 來源：http://m.842233.cn/ 瀏覽量：0

我們在給自動攪拌一體機新?lián)Q輪胎的注意事項：

Precautions for us to replace the tire of the automatic mixing machine:

(1)避免在惡劣的工作情況下運行作業；避免過急啟動，急轉彎和急剎車。

(1) Avoid operating under harsh working conditions; Avoid sharp starting, sharp turning and sharp braking.

(2)限制速度：防止生熱太大而引起小型裝載機輪胎脫層。

(2) Speed limit: prevent the tire delamination of small loader caused by too much heat generation.

(3)行駛作業中發現的異常如：聲音、振動等，應立即停車檢查。

(3) If any abnormality is found during driving operation, such as sound, vibration, etc., stop the vehicle immediately for inspection.

輪胎的花紋設計都是根據車型進行設計的，不同車型輪胎花紋不同，輪胎的花紋對噪音也是有影響的。

The tire pattern design is based on the vehicle type. The tire pattern of different vehicle types is different, and the tire pattern also has an impact on the noise.

輪胎所產生的噪音主要有兩種，一是當胎面與地面互相接觸時，輪胎溝槽會改變空氣流向所產生的噪音以及橡膠塊與地面敲擊所產生的噪音，都統稱為花紋噪音。二是由胎體結構以及橡膠配方所導致的噪音，稱之為結構噪音。

There are mainly two kinds of noise generated by tires. One is that when the tread is in contact with the ground, the tire groove will change the air flow direction, and the noise generated by rubber block knocking on the ground is collectively referred to as pattern noise. Second, the noise caused by carcass structure and rubber formula is called structural noise.

橡膠塊的占地面積越大，噪音越大，抓地越好；橡膠塊占地越小噪音越低，但抓地越差，這中間又在需要尋找平衡點。胎面花紋設計是一個在抓地、靜音和排水性之間既要找平衡的、又要尋求的過程。

The larger the floor area of the rubber block, the louder the noise, and the better the grip; The smaller the floor area of the rubber block, the lower the noise, but the worse the grip. In the middle, we need to find a balance point. Tread pattern design is a process of balancing and seeking between grip, silence and drainage.

2.自動攪拌一體機輪胎正常使用注意事項：

2. Precautions for normal use of automatic mixer tires:

(1)控制一體機質量和行駛速度輪胎標準規定了在速度下，相應的輪胎氣壓下的載荷。廠家的小型裝載機輪胎氣壓是根據標準要求在車輛額定負荷、正常作業過程中我們輪胎所承受的負荷情況而確定的。因此，車輛要按裝載機所標定的額定載荷進行裝載，正常情況下超負荷15以內是可以接受的。

(1) Controlling the mass and running speed of the all-in-one machine, the tire standard specifies the load under the corresponding tire pressure at the speed. The tire pressure of the manufacturer's small loader is determined according to the standard requirements, the rated load of the vehicle and the load borne by our tires during normal operation. Therefore, the vehicle shall be loaded according to the rated load calibrated by the loader. Under normal circumstances, overload within 15 is acceptable.

(2)控制自動攪拌一體機的輪胎充氣壓輪胎氣壓過高或低均會導致輪胎早期磨損，嚴重影響輪胎的使用壽命。

(2) Control the tire inflation pressure of the automatic mixing machine. High or low tire pressure will lead to early tire wear and seriously affect the service life of the tire.

上一頁：攪拌一體車如何重載試運轉？下一頁：自動攪拌一體車的功能有哪些？

熱門產品 / HOT PRODUCT